Energy-saving Dryer
Energy-saving dryer by belt conveyor or dou type hoist to hopper and by hopper of feeding machine through charging pipe into charging port . Feeding pipeline rake Angle than the natural material, so materials smoothly into energy-saving dryer (sand dryer) inside .The dryer cylinder is a rotating cylinder with the horizontal slightly into tilt . Material from higher end to join, heat body, and material by low-end enter into counter-current contact, also have heat body and material together and flow into cylinder , With the rotation of the drum materials than by gravity run to the end. Wet materials in the cylinder body forward movement process, directly or indirectly got heat body, make wet materials to be dry, then in the material end by belt conveyor or screw conveyor is sent out . In energy-saving dryer (sand dryer with copy cylinder body wall), its function is to board the material copied up and then, make the material of surface in contact with air drying rate increases, in order to improve and promote material progress .Heat body typically divided into the hot air and stack ,etc . Heat body after the dryer dust cyclone, generally require in the gas with material capture down . If you need further reduce exhaust HanChenLiang, also should pass bag filter or wet precipitator put again after discharge.
Contact Information
Henan Kefan Mining Machinery Co.,LTD
China
emma king
2025-07-04 13:43 Crawled by Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com) @216.73.216.97
