pelton turbine for hydropower generator
Post Message
-
pelton turbine for hydropower generator
-
2011-12-14
-
Computer, Peripherals & Software
-
Engineering / Technical Services - relative Selling Leads or Buying Leads
-
China
-
Offer to sell
-
* Its nozzle has a 22.5°angle with the runner rotation surface.
* The runner is heavily pushed by water from pressure pipe that is switched to high speed jet flow through spray nozzle, imposing the runner in inclined direction.
* The runner works by water flow entering one side of vane and coming out from its other side, pushing the runner to rotate, the runner then drive the generator through coupler to produce electricity.
* It can reliably operate with simple structure, easy inspection and maintenance.
* Inclined jet Type turbine has as simple structure as the pelton turbine, reliably operate with simple structure, easy inspection and maintenance.
* It has the merit of high specific speed, wide application range, easy to coupling and direct connation to the generator.
The features of the Pelton Hydro Turbines (Impulse Turbines):
特点:
They operate in a head range of 100 meters to 1000 meters and are primarily used for electrical power production. The power output ranges from 200KW to 20000KW, Runner diameters are between 0.13 and 5.81 meters. The speed range of the turbine is from 250 to 1000 rpm.
* The runner works by being heavily pushed with jet flow that is switched through injection nozzle from high-pressure pipe. The feature is that is works by impulsing the runner to rotate with kinetic energy of water flow, and the jet center of nozzle and the runner are in the same plane.
* It is divided into vertical type and horizontal type two kinds. Horizontal type each has 1-2 runner, each runner has 1-2 nozzle, vertical type each has only one runner, each runner has 2-4 nozzles.
Contact Information
-
Addnew technologies limited
-
China
-
Cherry Wang