Sivacon 8pt low voltage switchgear
Post Message
-
Sivacon 8pt low voltage switchgear
-
2011-11-28
-
Electrical and Electronics
-
Electronics Components, Assembles, Parts - relative Selling Leads or Buying Leads
-
China
-
Offer to sell
-
The SIVACON low-voltage switchboard is the standard solution for building and industrial technology.
SIVACON is tailored to the needs of the world market, i.e. it takes into account the call for standard solutions from a single source on the one hand and on the other for local production and the resulting advantages in terms of financing and procurement close to the plant.
As a power distribution board, SIVACON is available throughout the world and can be used at all power levels up to 7400 A, as withdrawable as well as plug-in and fixed-mounted units.
SIVACON Features:
• Type-tested standard modules
(TTA)
• Standardized busbar position at the top of the cubicle
• 3- and 4-pole busbar system up to 7400 A
• Rated peak withstand current Ipk up to 375 kA
• Deep switchgear compartment for universal installation Modular structure of device compartments
• Single-front and back-to-back installation
• Cable lead-in from above or below
• Cable connection from the front or rear
Modular technology makes it possible to adapt SIVACON optimally to all requirements.
• Standard horizontal busbar position at the top of the cubicle
• Any components can be installed in the device compartments regardless of the busbar position and cubicle depth
• Requirement-oriented compartmentalization of functional units (Form 1 to Form 4 according to IEC 60439-1)
• Deep device compartments
The frame consists of rigid sheet steel sections that are linked to one another: SIVACON’s dimensionally accurate and sturdy frame is available in bolted or welded versions.
Surface Treatment:
Optionally powder-coated, wetpainted or sendzimir-galvanized
Frame and enclosure are manufactured from sheet steel in the following thicknesses:
Frame: 2.5 mm
Enclosure: 2.0 mm
Degrees of Protection to IEC 60529 IP 30, IP 31, IP 40, IP41, IP 42 naturally ventilated IP 40, IP 54 unventilated
Differing requirements for the busbar system call for individual options.
SIVACON offers modules for economical setup and high level of safety.
• Busbar position at top
• Busbar system for rated currents up to 7400 A
• User-oriented gradation of rated currents
• Rated peak withstand current Ipk up to 375 kA
• Separation of the busbar compartment from the device compartment
• Transport unit joints easily accessible from above
• Arc barriers for limiting the effects of the arcing fault
The supply, feeder and coupling cubicles of the circuit-breaker design are equipped with withdrawable or fixed-mounted 3W. circuit breakers (ACB). User-Friendly with 3W. Siemens 3W. fixed-mounted and withdrawable circuit breakers are used for the rated current range from 630 to 6300 A. This means:
• Free choice of the supply direction without any restrictions in terms of technical data
• High short-time current-carrying capacity for time-graded shortcircuit protection up to 400 ms assures reliable operation of sections of the switchboard not affected by a short-circuit
• Short-circuit protection with shorttime grading control (ZSS) for very brief delay times (50 ms), irrespective of the grading level
• LCD operating current indication in the control console (without ammeters and current transformers)
Contact Information
-
Huapeng Group Co., Ltd.
-
China
-
Maggie lu