offer PVC water supply/disposal pipe extrusion line
Post Message
-
offer PVC water supply/disposal pipe extrusion line
-
2011-09-07
-
Chemical, Plastic, Rubber & Environmental Conservation
-
Plastic - relative Selling Leads or Buying Leads
-
China
-
Offer to sell
-
PVC Water Supply/Disposal Pipe Extrusion Line
Diameter scope: 16-800mm
Introduction:
Qingdao HUASU Machinery Fabricate Co., Ltd designs and develops PVC pipe extrusion line especially for PVC water supply and disposal pipe.
This pipe extrusion line mainly includes conical twin screw extruder, PVC pipe molds, vacuum calibrating water tank, water spraying cooling tank, haul-off machine, cutting machine and overturning bracket.
Conical Twin-Screw Extruder: It equipped with forced fixed-quantity material feeding system, automatic temperature control system, vacuum exhaust system and automatic speed control system. This structure assures accurate controlling for the material temperature, plasticization stability and greatly improving production speed. The main motor is direct convertor or frequency convertor. Motor output torque stability which can achieve step-less speed regulation.
PVC Extrusion Molds: Material is high quality 40Cr. Molds surface is dealt with polishing and chrome plating. The melt has low pressure. Extruding at high quantity, the die head still maintain low temperature.
Vacuum Calibrating Water Tank: The material of body is high hardness and good quality stainless steel board. It is high-pressure resistance, corrosion-resistance and two-stage for large diameter pipe. Stainless steel float adjusts water level and the structure is simple and practical. Electricity controls water temperature. The nozzle material is ABS engineering plastic. The frame of the machine can be adjusted three dimensions. The moving from front to back adopt cycloid reducer drive and up & down and left & right adopt screw adjustment.
Water Spray Cooling Tank: The body is made of stainless steel and the shade is transparent soft PVC curtain. Stainless steel float adjusts water level and electricity controls water temperature. The nozzle material is ABS engineering plastic. The frame of the machine can be adjusted up and down. There is roller device in the tank.
Haul-off Machine: It adopts frequency conversion approach. Every traction frame transfers with chain which ensures every track moving simultaneously. It is pneumatic flexibility clamping. The bearing has special structure which can effectively reduce the installation error. The machine has“ V ”type high friction coefficient rubber.
Cutting Machine: It is planetary cutting for large diameter. The blade takes rotation and cutting part and inserting blade part take revolution. It has angle cutting structure, pneumatic aluminum half clamping and cleaning device.
Control System: We can offer SIEMENS PLC controlling system which is intelligent controlling system. Also we can offer ordinary controlling system which use SIEMENS electrical parts, Omron temperature controller. Operation is simple.
Main Technical Parameter:
Model Pipe Diameter
(mm) Extruder Speed (m/min) Max.Output
(kg/h)
SJPGZ-50 Ø20-Ø50 SJSZ-51/105 1-12 150
SJPGZ-250 Ø50-Ø250 SJSZ-65/132 0.5-5 300
SJPGZ-315 Ø110-Ø315 SJSZ-80/156 1-3.6 420
SJPGZ-400 Ø200-Ø400 SJSZ-80/156 0.2-2 420
SJPGZ-630 Ø315-Ø630 SJSZ--92/188 0.08-0.8 750
Contact Information
-
Qingdao HUASU Machinery Fabricate CO.,LTD
-
China
-
Chuck Wang