Inverter CO2 MIG (IGBT) welder
Post Message
-
Inverter CO2 MIG (IGBT) welder
-
2011-06-15
-
Machinery, Mold & Fastener
-
Machinery - relative Selling Leads or Buying Leads
-
China
-
Offer to sell
-
Inverter CO2 MIG (IGBT) welder:
1. adopting advanced single-tube IGBT inverter technology. Small size,. Light weight. High cost-effective.
2. adopting PWM control technology, good constant flow performane. Precise control of current.
3. discontinuouse and continuouse welding function. Wire feeding without interruption.
4. small spark. Deep welding pool. Beautiful welding seam. Heat-proof and split-proof.
5. suitable for mild steel, low carbon steel, alloy steel etc. Many sorts of welding wire selections.
6. suitable for welding the mid/thin plate >0.8mm
Model MIG160 MIG200 MIG250
Rated input voltage(V) Three phases AC220V±15% 50/60Hz
Rated input capacity (KVA) 4.2 6 8.3
No-load voltage(V) 16.5-33 16.5-24 16.5-26.5
Output Current Range(A) 40-160 40-200 40-250
Wire feeding speed (m/min) 2.5-13 2.5-13 2.5-13
Wire feeder Build-in Build-in Build-in
Diameter of coil(mm) 102 270 270
Duty cycle (%) 60 60 60
Post-gas (S) 1±0.5 1±0.5 1±0.5
Earth cable(mm2) >/=2.5 >/=2.5 >/=2.5
Welding thinkness (mm) 0.6/0.8/1.0 0.6/0.8/10. 0.6/0.8/1.0
Effciency (%) 85 85 85
Power factor 0.93 0.93 0.93
Insulation class F F F
Protective class IP21S IP21S IP21S
Weitht(KG) 25 32 38
Dimension(cm) 450X220X380 535X280X440 560X305X560
Standard accessories Binzel MB15 welding torch, co2 gas flow, net tube 3m, fast plug, earth cable N24E welding torch, co2 gas flow, net tube 3m, fast plug, earth cable
Contact Information
-
Anxin Jingyuan Trading Co. , Ltd
-
China
-
Liu Helen