QYC front-end fixed jacks
Post Message
-
QYC front-end fixed jacks
-
2011-05-23
-
Machinery, Mold & Fastener
-
Machinery - relative Selling Leads or Buying Leads
-
China
-
Offer to sell
-
Model:QYC270,
Nominal pressure:270KN
Nominal hydraulic:62Mpa
Area of stressing cylinder:4400m㎡
Stroke of stressing:200mm
Overall dimension:φ114×529mm
Mass:24kg
Minimum working space:750×110mm
Reserved length of strand:220mm
QYC type front-end fixed jacks have internal re-usable anchor which can automatically clamp and loosen the wedge, they are mainly used for BFM15 and BFM13- type various single tensioning with bonded and unbonded.
Notice : QYC type front-end fixed jacks could be matched with different size, length of the top cover, retreat anchor device, to used in the experiment by root tension pre-tightening, tension retreat anchor and stay cable tone with single cable.
Hydraulic jacks
The machines and tools:
YDC feed-through jacks
QYC front-end fixed jacks
GYJ series extrusion machine
YH30 embossing machine
LD series upsetter
ZB high-voltage electric oil pump
Metal bellows molding machines
Mortar pump
Pierce duct machine
JB series mixer
BZK series vacuum pump
Prestressing anchorage:
JLM planished concrete rebar anchorage
LM screw bar anchorage
GZ steel tapered anchorage
BYM stressing-end anchorage
BM flat stressing-end anchorage
BM flat anchorage coupler
Fixed-end P anchorage
Fixed-end H anchorage
Contact Information
-
Beifang Prestressing Machinery Co.,LTD
-
China
-
Zhang Hua