013 TJK CNC Wire mesh welding line
Post Message
-
013 TJK CNC Wire mesh welding line
-
2011-05-21
-
Machinery, Mold & Fastener
-
Machinery - relative Selling Leads or Buying Leads
-
China
-
Offer to sell
-
013 TJK CNC Wire mesh welding line
Products Introduction:
The equipment is hydraulic bending steel mesh production line is applicable to the rapid devebpment to today`s construction industry needs design, the small size and easy to move, flexible variety of sizes,according to the demand curve at any angle between the 800-1800.
CHARACTERISTIC
1. Independent hydraulic driving device.
2. Imported electricity components.
3. Mesh bending control system easy for operate.
4. Control panel easy for operate.
5. Imported hydraulic system.
6. Control systems: SIEMENS, MITSUBISHI, PANASONIC.
TECHNICAL DATA
Model GWC-2050 GWC-2200 GWC-2400 GWC2600
Installed power(kva) 6*40 6*40 6*40 6*40
System coltagte(v) 380V 50Hz 380V 50Hz 380V 50Hz 380V 50Hz
Control voltage(v) DC 24V DC 24V DC 24V DC 24V
Power cable cross-sectional area 3*150mm ² +1*50mm ² 3*150mm ² 3*185mm ² +1*95mm ²
M ax.mesh width 2200 2300 2600 2600
L ine wire spacing 50-200 CNC 50-200CNC 50-200 CNC 50-200CNC
Cross wire spacing ≥25mm steplessly adjustable
Wire diameter(mm) 3-6 3-6 3-6 3-6
Max.welding capacity 6+6 6+6 6+6 6+6
Max.wlding speed(time/min) 60-100 60-100 60-100 60-100
Max.welding spot nos.(group) 20 24 24 26
Pressed air(MPa) ≥0.6 ≥0.6 ≥0.6 ≥0.6
Wire feeding methood Pre-cut/off-coil
Cater conrner accuracy(mm) ≤2 ≤2 ≤2 ≤2
Raw material Cold drawn wire,stainless wire,galvanized wire
Contact Information
-
China TJK Machinery Co.,Ltd.
-
China
-
Kathy Lee