TJK-007 CNC Rebar Bending Center
Post Message
-
TJK-007 CNC Rebar Bending Center
-
2011-05-18
-
Machinery, Mold & Fastener
-
Machinery - relative Selling Leads or Buying Leads
-
China
-
Offer to sell
-
TJK-007 CNC Rebar Bending Center
CHARACTERS:
1. Double bending system (one mobile and one stationary benders) can form bars to bending angles, with turntable reversal and automatic return to starting point.
2. Roller conveyor, rollers are covered by the rubber, antiskid and anti-noise, with automatic transfer and storage functions.
3. Two lifting levers, pneumatic control, discharge the bars from conveyor to double benders and distribute the finished products to storage rack after bending.
4. Storage rack: 2 or more storage racks.
5. PLC control system with LCD, user friendly interface.
6. Task management and storage programme realizes multi tasks to be processed continuously.
7. Transducer controls the bending speed.
8. Encoder ensures the bending angle precision.
Model Robot 40 Robot 40A Robot 50A
Conveying speed(m/min) 35 - 60 [m/min] 35 - 60 [m/min] 35 - 60 [m/min]
Bending speed(rpm) 8 [rpm] 8 [rpm] 8 [rpm]
Mobile bender move method Manual Automatic (servo) Automatic (servo)
Conveying power (kw) 7.5 [KW] 15.4 [KW] 19.4 [KW]
Bending power(kw) 5.5*2 [KW] 5.5*2 [KW] 7.5*2 [KW]
Bars diameter (mm) Φ20 Φ28 Φ32 Φ40 Φ20 Φ28 Φ32 Φ40 Φ20 Φ28 Φ32 Φ40 Φ50
Bending bars no° 3 2 1 1 3 2 1 1 4 3 2 1 1
Contact Information
-
China TJK Machinery Co.,Ltd.
-
China
-
Kathy Lee