Water Welder
Post Message
-
Water Welder
-
2011-03-03
-
Chemical, Plastic, Rubber & Environmental Conservation
-
Environmental Conservation Products and Equipment - relative Selling Leads or Buying Leads
-
China
-
Offer to sell
-
Water Welder can be used easily, safely, cleanly and effectively with water and electricity as fuel. It is light,energy saving,environmental friendly,safe and reliable.
Working Principle
Using a standard electrical supply, hydrogen and oxygen are produced by the electrolysis of distilled water. Inlet AC to electrolytic cell filled with NaOH or KOH and water molecules are decomposed gradually and then hydrogen and oxygenare produced.The mixed gases are passed through a gas atomiser and delivered to single or multiple torches via an output lead.
Typical Uses
1.Gold, silver, jewelry work
2.Metal parts partial heat treatment.
3.Enamel wires lead trimming.
4.For general annealing and welding.
5.Solar Panels Manufacture
6.Polishing uneven and hard-to-reach area of acrylic products and acrylic parts without any residue;Any acrylic lettering
7.LED welding.
8.Ideal for thermocouple processing.
Superiority of Water Welder
1.The flame of Water Welder does not burst, and it is still and sootless.No carbon comes out from Water Welder.
2.Water Welder is suitable for indoor work because it is the most clean energy in comparison with any other energies. For example, emplyees of a work place in which workmen weld thousands of piping parts for air conditioner or refreezerator had suffer from headaches. However, the headaches was gone when they replace the gas by Brown Gas.
Economical Efficiency of Water Welder
Monthly gas cost using Water Welder is cheap, about 1/6 of LPG and about 1/17 of acetylene.
Operation Efficiency of Water Welder
The flame is the pin-pointed with highly pureness and high temperature. It makes a straight on and has a fast flame speed and heat concentration.Those things make a good work accuracy and fast melting to save time, no metal deflection and no color change.
Technical Parameter:
Gas Output 200Liter/Hour
Volume 620*380*520mm
Weight 32.5kg
Working Voltage AC220V/50HZ
Flame Condition
Mixed hydrogen and oxygen;Blue Flame;
2800 Degree Centigrade
Supplement: It can work durably for 24 hours and voltage can be changed according to your requirements.
Contact Information
-
Honguang Machinery Factory
-
China
-
Hailey Wang