H100 Acrylic Flame Polisher
Post Message
-
H100 Acrylic Flame Polisher
-
2011-03-02
-
Chemical, Plastic, Rubber & Environmental Conservation
-
Environmental Conservation Products and Equipment - relative Selling Leads or Buying Leads
-
China
-
Offer to sell
-
H100 Acrylic Flame Polisher, also portable and weighing less than 30lbs (12kg), can offer 2 torches to produce mixed hydrogen and oxygen that is applied in acrylic processing, jewelry work,copper brazing, dental mold making and school labs.
Working Principles:
Using a standard electrical supply, hydrogen and oxygen are produced by the electrolysis of distilled water. Inlet AC to electrolytic cell filled with NaOH or KOH and water molecules are decomposed gradually and then hydrogen and oxygenare produced.The mixed gases are passed through a gas atomiser and delivered to single or multiple torches via an output lead. H100 is the most popular unit used in flame polishing. The machine can polish acrylic up to a thickness of 15mm in one pass.Its\\' Micro size flame makes acrylic products polishing possible where difficult holes, corners, edges and areas traditional polishing machinery aren\\'t able to reach. 2800`C high temperature micro flame rapidly makes acrylic products edges crystal, clear and silky smooth.
Special Features
Acrylic Flame Polisher is protected by an overpressure control linked into an electrical circuit break, such that, in the unlikely event of an overpressure condition arising the machines witches and locking off automatically.
A flame-back arrestor is fitted into the torch as a safeguard to the operator and also to prevent damage to equipment.
Typical Uses
1.Polishing uneven and hard-to-reach area of acrylic products and acrylic parts without any residue; Any acrylic lettering
2.LED welding.
Technical Parameter:
Model: H100
Max.Gas Production: 100Liter/Hour
Flame Condition: Mixed hydrogen and oxygen;Blue Flame;2800 Degree Centigrade
Gross Weight: 12kg
Dimensions L*W*H: 48cm*28cm*36cm
AC Voltage Requirement: 100V-240V
DC Current: 5A-40A
Max.Working Pressure: 0.1Mpa
Max.Water Consumption: 0.05Liter/Hour
Contact Information
-
Honguang Machinery Factory
-
China
-
Hailey Wang