male thread thermostatic mixing valveMODEL:DN15M-2With check valveWith check valveIdeal working pressure0.1-0.5MpaCold water inlet temp.4-29 ℃Hot water inlet temp.50-85 ℃Mixed water outlet temp.35-45 ℃ customizedFlow rate11.67L/Min 0.1Mpa pressure differenceTemp accuracy±2℃Body materialNickel plated BrassThreadG 1/2″ male threadStandardQB2806-2006Net weight0.32 KGSGross weight0.378 KGS Safe lock toward hot direction,Website:http://www.sybxvalve.com, press the red button twist to high temperaturePositionMin1234567MaxTemperature(℃)-30333537394245-Usage of TMVsFor wash hand basins, bidets, baths and showers in hospitals, schools, sport and leisure facilities, prisons and other public buildings.Installation Precaution:a.All installations should be carried out by a Licensed Professional.b.Install in accordance with markings on valve body. i.e. hot water inlet-marked H, cold water inlet-marked Cc. After temperature setting, if inlets temperature or pressure fluctuates, outlet temperature variation is within +/-2 C.d.The external check valves at inlets prevent cross-flow of hot&cold water when inlets pressure is not the same.e.If the ratio between two inlets is too large, one flow-limiting valve should be fixed at the side of higher pressure.f. Prior to installation, provisions should be made to flush the piping of any debris or other foreign materials to ensure proper system operation
Contact Information
Shenyang Beixin Energy Saving Equipment Co.,ltd
China
yan zhang
2025-05-10 00:58 Crawled by Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com) @3.144.6.159
