Mine hydraulic support jack with A variety of design
Post Message
-
Mine hydraulic support jack with A variety of design
-
2015-07-16
-
Machinery, Mold & Fastener
-
Machinery - relative Selling Leads or Buying Leads
-
Canada
-
Offer to sell
-
Introduction
Mine hydraulic support jack series products is supporting parts of various frame type hydraulic powered supports in fully mechanized coalface, lightduty roof caving coal hydraulic support, for the support of support to help push slip, balance, lateral push function, is the main component of the frame and various parts of the action.
Variety specification:
According to zoning, hydraulic support jack can be divided for pushing jack, a front beam jack, retractable beam jack, the equilibrium jack, side pushing jack, Jack, anti down Jack, anti-skid jack, slope protecting Jack.
Note:
The sealing performance of the sealing member should be ensured when the jack is assembled, and the phenomenon of the extrusion and tearing of the inner groove of the jack is not allowed. After assembly, the assembly should be reduced to the shortest position. The assembly is completed, all of the inlet and outlet are used in plastic blocking. When Jack products to the hydraulic bracket assembly, should check the connection part dimensions correspond to whether or not, and check the telescopic upright post is flexible, whether there is leakage and so on, found that the problem timely treatment to install. When the installation of hydraulic support in the underground scene, shall not bump in the process of transportation products, so as not to affect the installation and use. Installation is complete, should carry out the adjustment of the jack of the performance of the test, the requirements of flexible, in place, not to have card stop, abnormal noise and automatic fall phenomenon.
Contact Information
-
jining dongda mining machinery co.,ltd
-
Canada
-
laura hao