Molybdenum wire or molybdenum wire for cutting
Post Message
-
Molybdenum wire or molybdenum wire for cutting
-
2015-07-07
-
Handtools, Metal Items, Construction Materials
-
Industrial & Commercial Metal Items - relative Selling Leads or Buying Leads
-
China
-
Offer to sell
-
Molybdenum wire or molybdenum wire for cutting
1. Specifications
Molybdenum Wire Types Diameter (inch) Tolerance (%)
Molybdenum Wire for EDM 0.0024\\" - 0.01\\" ±3% wt
Molybdenum Spray Wire 1/16\\" - 1/8\\" ±1% to 3% wt
Molybdenum Wire 0.002\\" - 0.08\\" ±3% wt
Molybdenum Wire(clean) 0.006\\" - 0.04\\" ±3% wt
2. Process
We handle every stage in the manufacture of our products inhouse.From the raw materials through to the finished molybdenum wires: including the development of new materials. In this way, we can guarantee that you benefit from the very best quality.
3. Technical condition
GB4182-84(Chinese standard for molybdenum wires)
ASTM B386-90(American standard for molybdenum bars, rods, wires)
Composition
Grade The impurity content is not more than %
Fe Ni Al Si Mg C N O
Mo-1 0.01 0.005 0.002 0.01 0.005 0.01 0.003 0.008
Mo-2 0.01 0.005 0.005 0.01 0.005 0.01 0.003 0.02
4. Packaging
Standard individual packing: depending on their size, the sheets will be either packed individually or in parcels with paper between the different pieces.
5. Application: Molybdenum wire can withstand high temperature and corrosion, it is used as heating materials of high-temperature resistance furnace, heating elements, automotive, aerospace, wire cutting machine; With good electrical conductivity, molybdenum wire also can be applied to electronic tube socket, stent filament incandescent lamp, halogen lamps, discharge tube sealing material, lead-wire, tungsten filament with the mandrel, the grid. There are some other common uses for molybdenum wire such as cathode, spray material.
Molybdenum rod or molybdenum bar
Specification:
Mo content: Mo>=99.95%
Density:>= 10.2g/cm3
Dia: 2.5-120mm
Surface: polished, ground, cleaned
Surface Finish
Black – Surface is “as swaged or “as drawn”; retaining a coating of processing lubricants and oxides.
Cleaned - Surface is chemically cleaned to remove all lubricants and oxides.
Ground - Surface is centerless ground to remove all coating and to achieve precise
1. Dimensions and tolerances
1.1 Diameter and guaranteed production tolerance
Diameter Ø (mm) Diameter tolerance (mm) Diameter Ø (mm) Diameter tolerance (mm)
ground Cleaned
0.50 - 0.99 ± 0.007 0.50 - 4.00 ± 2.00 %
1.00 - 1.99 ± 0.010 4.10 - 10.0 ± 1.50 %
2.00 - 2.99 ± 0.015 15.0 - 50.0 ± 0.30
3.00 - 15.9 ± 0.020 50.1 - 75.0 ± 0.40
16.0 - 24.9 ± 0.030 75.1 - 120.0 ± 1.00
25.0 - 34.9 ± 0.050 121.0 - 165.0 ± 1.50
35.0 - 39.9 ± 0.060 Turned 40.0 - 49.9 ± 0.30
>= 40.0 ± 0.20 50.0 - 165.0 ± 0.40
1.2 Production length and straightnessDiameter Production length Straightness / meter(mm)
(mm) (mm) Cleaned Ground / turned
0.50 - 0.99 500 < 2.5 < 2.5
1.00 - 5.90 500 < 2.0 < 1.5
6.00 - 165.0 500 < 1.5 < 1.0
2. Product properties and tests
Density: Ø 0.50 - 40.0 mm > 10.2 g/cm3
Ø 40.1 - 80.0 mm > 10.10 g/cm3
Ø 80.1 - 120.0 mm > 10.00 g/cm3
Ø 120.1 - 165.0 mm > 9.90 g/cm3
Contact Information
-
xi'an huamu technology co.,ltd
-
China
-
Cathy yan