Impact crusher with multi-cavity evenly broken
Post Message
-
Impact crusher with multi-cavity evenly broken
-
2014-09-14
-
Machinery, Mold & Fastener
-
Machining - relative Selling Leads or Buying Leads
-
Lesotho
-
Offer to sell
-
Brief introduction:
Impact crusher is a new high-efficiency crushing equipment, its features are: small size, simple structure, crushing ratio, less energy consumption, production capacity, uniform particle size, selective crushing effect, and is promising equipment; the biggest defect of impact crusher is hammer and back plate are particularly vulnerable to wear and tear, especially crushing hard ore, wear and tear is more serious and require frequent replacement. Currently, since some wear-resistant material appeared, in some metal concentrator has been applied.
Principle:
Impact crusher is the crushing machinery which uses impact to crush material. When impact crusher running, rotor driven by motor rotates in high speed, material strikes on the plate hammer of rotor to crush when material coming in then plate hammer zone, then material will be thrown to impact device to re-crush, this is a repetition process, raw material will be taken into three different chamber to crush until it become satisfied size. The final products will be discharged from discharge hole. Adjusting the gap between impact frame and rotor is the way to change the final size and products’ shape.
Stone material directly falls onto the rotating turn plate from machinery top. Under the centrifugal force effect, stone will crash with the moving stone which discharged from another part, after that, stone is about to gather around the gap between turntable and enclosure to crush, rub and grind, final product will be discharged from bottom, whole process is a closed circulation, size of the sand is controlled by screening machinery.
Advantages:
1.Impact crusher crushing large wet materials more efficiently, and can effectively prevent the material clogging.
2.The hardness of the material more widely applicable.
3.Impact crusher can be convenient and flexible to adjust the particle size, wide adjustment range
4.Wearing parts wear small, metal utilization is high
5.Impact crusher spare parts are easy to replace, corresponding reduction in maintenance costs.
Performance:
1.Multi-cavity evenly broken, suitable for crushing hard rock;
2.Low and large feed opening, increasing the size of the feed;
3.Plate hammer, impact plate and lining are made of new wear-resistant materials, longer life;
4.the entire board structure makes nesting more size and cube-shaped, without the grain;
5.Cubic shape, nesting particle size adjustable;
6.Hydraulic open, easy maintenance and replacement of wearing parts;
7.Large feed opening, high crushing chamber, adapt to high material hardness, block degree, and less product powder.
Buy note:
Optional impact crusher should be noted that the following three points:
First, the performance characteristics and ease of operation
Vipeak Heavy Industries developed impact crusher is used in multi-cavity evenly broken, not only improves the production capacity, but also energy-efficient. When the motor drives the rotor rotates at high speed, toothed hammer will be a high-speed crash, Bounce back liner functions performed by the broken again.
Two, pay attention to the material of impact crusher
Vipeak impact crusher uses a new type of wear-resistant material, not only rigidity and resistance to wear. Stability, safety and reliability.
Third, after-sales service
At the time of purchase, the merchant must pay attention to ask, How to maintain and repair impact crusher?? Of course, there are some methods for safe operation, all need to understand clearly. At this point, vipeak do is quite good. Whether it is pre. Sale, after-sales, we provide customers with a wide range of services.
Model Specification (mm) Feed Opening (mm) Max. Feeding Size (mm) Capacity (t/h) Model of Motor Power (kw) Weight (t) Overall Dimensions
(L×W×H) (mm)
PF-1007 Φ1000×700 400×730 300 35-50 Y250M-6 37 9.5 1800×1600×1800
PF-1010 Φ1000×1050 400×1080 350 50-80 Y315S-6 75 14 2340×2007×2500
PF-1210 Φ1250×1050 400×1080 350 70-120 Y315L1-6 110 17 2582×2053×2809
PF-1212 Φ1250×1200 400×1250 350 70-140 Y315L2-6 132 17.5 2582×2203×2809
PF-1214 Φ1250×1400 400×1430 350 80-160 Y315L2-6 132 22 2582×2403×2809
PF-1315 Φ1300×1500 680×1520 350 90-220 Y2-355M2-6 200 26 2930×2761×3053
PF-1320 Φ1300×2000 680×1570 350 110-350 Y2-355M2-6 280 28 3340×2950×3000
impact crusher impact crusher
Contact Information
-
Vipeak Heavy Industry Machinery Co., Ltd.
-
Lesotho
-
April He