gold separator jig machine
Post Message
-
gold separator jig machine
-
2014-03-29
-
Machinery, Mold & Fastener
-
Machinery - relative Selling Leads or Buying Leads
-
China
-
Offer to sell
-
The gold percentage is not so high in the rock gold, so the plants for the rock gold shall treat much, be of high recovery rate, energy-saving & environment-friendly. And the jigging gravity separation machines, especially the Forui jiggers, win great praises by clients. The three model series for gold beneficiation are 2LTC6109/8T, LTA series and JT series.
1) 2LTC6109/8T jigger is also called trapezoid diaphragm jigger with its working section trapezoid and four jigging slots dependently adjusted. This jigger can treat the ore below 8mm with high recovery rate. Its working area is 5.76 square meters with its large treatment capacity. 1000t/d can be managed for one single 2LTC6109/8T jigger.
2) LTA series jiggers are kind of down-moving cone diaphragm jigger with its well-knit structure, large treatment capacity, and high recovery rate. It is also the core equipment for the mobile gold beneficiation group.
3) JT series jiggers are designed especially for the rock gold enrichment with its jigging motion saw-tooth wave. It can help to get a great efficiency for fine ore, 98% for the rock gold and it is usually working as the refining machine for placer gold ore and sand tin ore.
Here in Gongyi Forui Machinery Factory in China, there are mini trial machines and if your ore samples about 20kgs can be available, we can do a mini ore beneficiation test for you free. And your further contact is highly appreciated.
Contact Information
-
mineral concentrator
-
China
-
Sera Song