Hud Head up Speed Water Temper Battery Voltage Warning Shift Reminding
Post Message
-
Hud Head up Speed Water Temper Battery Voltage Warning Shift Reminding
-
2013-11-02
-
Electrical and Electronics
-
Electronics Components, Assembles, Parts - relative Selling Leads or Buying Leads
-
China
-
Offer to sell
-
Feature:
* Head Up Display
* Digital display engine speed state
* Water temperature too high tip and Engine speed tip
* Instant km fuel consumption display and battery voltage display
* Auto wake up host, the unit will turn on when the engine start. And auto standby when the engine off
*Auto adjustment on HUD display brightness, bright in day time and not dazzling in night time
Specification:
Goods accessories: Host ODB data line reflection paster host fixed pad specification
Display type: Digital
Baby for: All conform to the second generation of vehicle automatic diagnosis system (OBD II) models
Environment temperature: ~40c+80cAtmospheric pressure86-106kpa
Alarm sound level: > > =30dB
Working voltage: 9V~16VDC(12VDC/70mA)
Display project: Speed @ engine speed @ instantaneous fuel consumption @ engine temperature @ battery voltage
Speed display: Projection display car speed; The safest way to avoid lower the head to watch
Engine speed: Show car engine speed state
Instant oil consumption: Display the current instantaneous speed per liter of gasoline mileage drivable
Speeding tip: In the setting of overspeed alarm value, to achieve the speed flashing lights up and prompt
Engine temperature: Water temperature reached 115 degrees automatically alarm and light up
Shift hint: When the engine speed and speed reaches a certain scale, tips to save fuel consumption increase
Gear
Km unit: The international system of units, the general use kilometers per hour, with km/h
Buzzer mark: According to the switch can be opened and closed buzzer sound
Preparation Before Installation And Use
1. Confirm your car brand and relevant car information. This product is only used for cars with OBD II(OR EU OBD) interface. Figure 1. Remarks: Open and look for the sticker under the engine hood, can use this
Product if
It has the sticker with OBDII CERTIFIED. Figure 1.
2. Check if it has the automobile diagnostic socket under the steering wheel(most of car in China has this socket manufactured after the year 2006.
3. Identify the car's 16-pin diagnostic socket (Figure2), connecting the OBDII cable to the 16-pin diagnostic socket if it has this socket.
4. Put the nonslip pad onto the instrument pane, then put HUD on the nonslip pad, you can
Adjust the angle an position.
5. The reflective film may be affixed to the forward position of HUD and stick to the front windshield,
Ensure that the information, such as car speed can be projected to the reflective film.
Contact Information
-
Changsha PDM-Electronic Co., ltd
-
China
-
JENNY LIN