offer Cable Duct Grout
Post Message
-
offer Cable Duct Grout
-
2013-04-08
-
Handtools, Metal Items, Construction Materials
-
Construction Materials - relative Selling Leads or Buying Leads
-
China
-
Offer to sell
-
DMARGROUT® 818 cable grout is a non-shrink, cementitious aggregate-free grout with a unique 2 phase shrinkage compensating mechanism. It is non-metallic and contains no chlorides with a special blend of shrinkage-reducing and plasticizing/water-reducing agents. DMARGROUT® 818 compensates for shrinkage in both the plastic and hardened states. It produces a fluid, pump-able nonshrink non-bleeding, hing-strength product .It provides corrosion protection for highly stressed steel cables.
Application
1. Use for grouting with tight clearance requirements.
2. Use for horizontal and vertical grouting of ducts within bonded, post-tensioned structures.
3. Use for grout and fill or repair voids within ducts of post-tensioning strands for corrosion protection.
4. Used for grouting cable anchor plates where grout contacts highly stressed anchorages
5. Use for vacuum grouting for repair of voids in previously grouted post-tensioned tendons.
Data analysis list
Item Properties
Appearance Gray powder
Component Portland cement
Wet Density 2.00kg/L
Water-cement ratio 0.26～0.28
Total Chloride ions None
Initial Setting Time（ GB/T1346-2001） About 4h to 12h
Final setting Time（ GB/T1346-2001） Less than 24h
Flow Cone Efflux time (TB/T3192-2008) 20～35s
24h Swell Ratio ( TB/T3192-2008) betwween4%and8%
Compressive Strength (GB/T17671-1999) 1d More than 20MPa
3d More than 35MPa
7d Approximately 50MPa
28d Approximately 60MPa
Contact Information
-
Shanghai saking grouting system co.,ltd
-
China
-
huang tingfang