TL-110 Automatic Wire Coiling Machine for heating element/resistance heater is used to wind a wire into a circular heater. It applies to wire with different diameters, and both single-wire or double-wire are OK.
Functions:
1. The principal axis speed controlled by Japan Mitsubishi transducer. Continuously coils electric resistance and consistent clean-cut ends on the coils.
2. The machine will produce coils with very consistent resistance values and with open inside diameters for easy assembly to the terminal pins
3. When lack of wire or wire is broken, the machine would stop automatically. It also can accumulate the output automatically.
4. Wire with small diameter is usually cut by galvanomagnetism while wire with large diameter is cut by cylinder.
5. This machine is of small size, easy to operate, no operator is required.
6. Wire with large diameter can adopt double-pinch roller type.
Main technical parameters:
1． Power supply:220V,50Hz
2． Rated power:500W
3． Main axis speed:0~2134rpm
4． Pinch roller speed:0~74rpm
5． Accuracy:＋/－1%
6． I.D. of element:0.75mm~12.7mm
7． Wire diameter:0.10mm~0.85mm
8． Size(L*W*H):1800*700*700（mm）
9． Weight:730kg
Other name: wire coiling machine, coil winding machines, coil winders, coil winding equipment, coil winding machinery, spring coiling machine, coiling equipment, wire winding machines, wire winding equipment
Contact Information
Company :
Tongli Machinery Technical Ltd.
Country :
China
Contact person :
Judy Peng
2009-12-15 17:07 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html) @208.185.167.108
Copyright
(C) 1996-2008 All Products Online Corporation. All rights reserved.
Post Message