. Mirror-print the image on the printing material, dry the ink completely (normally around 5-10 minutes)
2. Remove the protection film on the middle material, put the printed material right on both side of the middle material, then, go through the laminator (set temperature around 150℃-180℃)
3. Cut the laminated sheet into standard card, remove the protection film from the surface of the card.
Contact Information
Company :
Hangzhou Xuemei Digital Tech Co.,Ltd
Country :
China
Contact person :
tess zeng
2008-08-22 09:11 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html) @208.185.167.108
Copyright
(C) 1996-2008 All Products Online Corporation. All rights reserved.
Post Message