brief introduction: Terminal Crimping Tools, Terminal Crimping Tools, Terminal Crimping Tools, Crimpers, Crimp Tool, Crimp Tools, Hand Crimping Tool
detailed information:
Copper Tube Terminal Crimping Tools
Terminal Crimping Tools, Terminal Crimping Tools, Terminal Crimping Tools, Crimpers, Crimpers, Crimpers, Crimpers, Crimpers, Crimp Tool, Crimp Tools, Hand Crimping ToolCrimpers, Crimp Tool, Crimp Tools,
Hand Crimping Tool, Hand Crimping Tools, Ratchet Crimping Tool, Ratchet Crimping Tool, Ratchet Crimping Tools, Ratchet action tool,
Terminal Crimping Tools, Coax Crimping Tools, Coaxial Crimping Tools, Crimping Pliers, Hydraulic Crimping Tool, Hydraulic Crimp Tool,
Wire Stripper, Cable Wire Stripper, Strippers & Crimpers, Wire Stripper Cutter, Wire Stripper for Coaxial Cable, Cable Cutter ,
Crimping & Stripping Tool, Cable Tie Tool
The crimping tools is used for non-welding and standard electrical connection, the mould of the crimping month is made of SCM-40 hardest tools steel, it is with the characteristics of long life, accurate before diameter and good crimping effect.
1. HX-120B for non-insulated cable links
Applicable range: Standard copper terminal: 10-120mm2
Length: 390 mm
Weight: 1.3kgs
2. HX-50B for non-insulated cable links
Applicable range: Standard copper terminal: 6-50mm2
Length: 620 mm
Weight: 4kgs
3.HX-120D for non-insulated cable links
Applicable range: DIN 46235 copper terminal: 25-150mm2
Length: 620mm
Weight: 4kgs
4. HX-120A for non-insulated cable links
Applicable range: DIN48201 type(mm2) aluminum conductor: 16-120mm2
Length: 620mm
Weight: 4kgs
5. HX-150B for non-insulated cable links
Applicable range: Standard copper terminal: 25-150mm2
Length: 620 mm
Weight: 4kgs
6. HX-245B for non-insulated cable links
Applicable range: Standard copper terminal: 70-240mm2
Length: 980mm
Weight: 5.6kgs
About Crimp Tools and Cable Strippers
Crimp tools and cable strippers are used to prepare cable for installation. There are many different types of crimp tools and cable strippers. Examples include cable tie tools, strength-saving ratchet terminal crimping tools, hand crimp tools, and compression crimp tools. A cable tie tool is used for tightening ties around wire and cable bundles. A hand crimp tool is used in situations that present restrictions to crimp equipment size, weight, and maneuverability such as those presented with wire harness assembly boards. These crimping tools can be either manually-driven or power-driven. Crimp tools and cable strippers are commonly available.
Crimp tools and cable strippers function in a variety of ways. Crimp tools and cable strippers will properly crimp and strip solid or stranded wire, Teflon, PVC, nylon, rubber, neoprene, and most other jacket or insulating compositions. A cable tie tool controls loose wires that can be hazardous. A cable tie tool uses a tension control lever to provide precise tightening. Another lever cuts off the ties, so no additional tie ends will be visible. An Crimps Strips & Cuts Tool has a built in cable stripper as well as a wire cutter that cuts wire in one cycle. The Crimps Strips & Cuts Tool consists of a steel frame with black oxide coating. The precision ground crimp dies and the full-cycle ratcheting mechanism enable the tool to perform consistent terminations. A hand crimp tool consists of a ratchet mechanism hand tool and a set of jaws. The jaws comprise of upper and lower crimp dies. The contact is correctly crimped when the crimping tool is free to open at the fully closed position, e.g., when the ratchet releases. Hand crimp tools provide for a means of accurately locating, supporting, and holding a terminal or connector in place during crimping as opposed to the operator holding the components. A compression crimp tool utilizes a full cycle mechanism to assure consistent connector shut heights. Compression crimp tools achieve maximum mechanical advantage with reasonable hand pressure. Compression crimp tools feature connector shut heights that conform to industry standards and are precisely engineered for specific connector requirements. Crimp tools and cable strippers are designed and manufactured to meet most industry specifications.
Contact Information
Company :
wenzhou meterking(tools) co.,ltd.
Country :
China
Contact person :
vivian chen
2008-10-12 09:54 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html) @208.185.167.108
Copyright
(C) 1996-2008 All Products Online Corporation. All rights reserved.
Post Message