OBDII CAN USB
Interface V-607
Compatible with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8.
Protocol timing indistinguishable from a real VAG / VAS tool. Works reliably even with \"difficult\" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2. 6l with Hella ECU.
Built-In VAG-Saver functionality--instantly alerts the user if either the K / K1 line or the L / K2 line is shorted to Ground or Vbatt.
Full support for dual-K lines found in \"new\" (B6 / 8E chassis Audi A4 and 2002 + Audi A6--no VAS-6017 required--no manual switches!
Fully backwards compatible with older cars using a single K-line or
K plus L.
Q: What is CAN and why is it important?
A: CAN stands for Controller Area Network. Can is a new means of communicating with the can for diagnostics used by the latest generations of VW, Audi, SEAT, and Skoda vehicles. Unlike the older ISO9141 system which a used a single K-line for diagnostic communications, the new CAN-Bus system uses a twisted pair of wires with differential signaling. Can is considerably faster than ISO-9141 (500 kpbs vs. 10. 4 kbps) . Both new hardware and new software are required in order to communicate with cars using CAN for diagnostics.
Q: Does VAG-COM work with cars that require direct CAN access for diagnostics?
A: Yes! We have integrated CAN compatibility since the Release 404. 0 version of VAG-COM, but as CAN uses different hardware, new interfaces are required in order to communicate with a CAN-based car. These are now available as well. The new HEX-COM + CAN and HEX-USB + CAN interfaces are fully compatible with the new latest cars which require a direct CAN connection.
Features:
1. USB connector plugs into most modern laptops!
2. Compatible with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8.
3. Protocol timing indistinguishable from a real VAG / VAS tool. Works reliably even with \"difficult\" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2. 6l with Hella ECU.
4. Built-In VAG-Saver functionality--instantly alerts the user if either the K / K1 line or the L / K2 line is shorted to Ground or Vbatt.
5. Full support for dual-K lines found in \"new\" (B6 / 8E chassis Audi A4 and 2002 + Audi A6--no VAS-6017 required--no manual switches!
6. Fully backwards compatible with older cars using a single K-line or K plus L.
7. Bi-Color (red / green) status / activity LED
Contact Information
Company :
CNAUTOKEY TECHnology Co., Ltd
Country :
China
Contact person :
alice zhang
2008-10-11 03:17 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html) @208.185.167.108
Copyright
(C) 1996-2008 All Products Online Corporation. All rights reserved.
Post Message