USB2.0 to SATA/IDE Cable be used to connect Hard disk, CD-ROM, DVD-ROM, CD-RW, and COMBO device, DVD-RW to computer with USB2.0 interface.
Features:
USB2.0, supports 480M data transfer rate and 52x CDROM data read. External power supply can be use to AC90v-264v, 47-63Hz.
Components:
1) USB to SATA/IDE cable: used to connect SATA/IDE device to computer with USB port
2) Power with 12v and 5v double channel output: used to supply power to SATA/IDE device.
Package:
USB to SATA/IDE cable 1pcs
AC Power 1pcs
Driver CD 1pcs
User's manual 1pcs
Device Installation:
Hardware install:
1) Comfirm device is under master mode.
2) Connect SATA/IDE connector to SATA/IDE device.
3) Connect AC power to SATA/IDE device.
4) Connect cable to USB port of computer.
Driver Install:
1) Window98: Insert Driver CD to CDROM and run X:\win98\stup.exe before you insert the cable to your computer.
2) Window2000/me/XP: You don't need to install any driver.
3) Mac8.6 or higher: Copy Gene USB SATA/IDE_05E3_0702.sit to desktop and double click it to get driver file. Then copy the driver to [System Folder] [extensions]. After that, connect cable to computer and reboot the system.
Post Message