Features:
1. Hand-pressing for power generation.
2. Ultra-bright LED lighting, max brightness can reach 30000 mcd.
3. Convenient to use, never need to change battery.
4. long-life span.
5. Unique design, lightweight size, attached a string convenient to carry.
Main technical parameters:
1. Lighting
A. The max brightness of the 2LEDs can reach 32000 mcd.
B. Squeeze the hand crank at the speed of about 2 times per second for 1 minute can make 2 LEDs lighting 3 minutes. ( Notice: squeeze the hand crank to the end position )
2. Lifespan
Switch 10000 times
LED 100000 hours
Plastic part 5 years
Whole unit 5 years
Instruction:
Lighting
1. Release the hand crank by sliding the rear switch to the back position; give a few squeezes for 20 to 30 seconds to generate the power.
2. Push the switch forward, 2LEDs on; push it back, 2LEDs off.
3. Squeeze the hand crank down, slide the rear switch to the front position to lock the hand crank.
NOTICE:
1. Medium squeeze, too hard may reduce the lifespan of the product.
2. Usually squeeze to charge it for longer long lifespan. ( No less than 1 minute every time ).
3. Do not place the unit in high-temperature or high humidity place.
4. The product is not waterproof; do not drop it into water.
Size: 107*71.9*33.5mm
Weight: 94.42g
Contact Information
Company :
Zhejiang Sorbo Electronic Co., Ltd
Country :
China
Contact person :
Li Xuyu
2008-11-23 19:30 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html) @208.185.167.108
Copyright
(C) 1996-2008 All Products Online Corporation. All rights reserved.
Post Message