This machine adopts cast iron body, X, Y, Z adopt line rotundity guide, installed on the machine directly, can increase the rigidity of the machine, X, Y, Z axes are imported from overseas. Running characteristic is good and precision is high.
This machine can engrave precision arts and crafts, accepts standard HPGL(TM) plot instruction and G code digital processing instruction, and accepts other software. The main axes adopts 700W main axes electricity machine, no noise, no pollution, long life. The electronic parts are good design.
Parameters:
Model: CTE-1225S
The size of the working table (mm): 1,300 x 2,925
X, Y, Z travel(mm): 1,200 x 2,400 x 100
Maximum running speed(mm/min): 9,000
Maximum engraving speed(mm/min): 6,000
Precision(mm): 0.05
Repetition location precision: 0.05
Acceptable media widths(mm): 130
Power consumption(w): 300
Driving way: mini-step drive
Main axes/collet: 1.5KW/φ6, φ3.175
Running speed of the main axes(turn/s): 600-24,000
Interface: PCI
Engraving order: HP-GL, G-code
Running circumstance: Temperature: +5~+35oC, relative humidity 30%-75%
Electronic pressure: AC220V±10% 50HZ
Weight (kg): 810
Dimension (mm): 3,025 x 1,550 x 1,250
∴ All parameters above subject to change without prior notice.
Contact Information
Company :
Guangzhou Loly Electronic Technology Co., Ltd.
Country :
China
Contact person :
Mandy Liao
2008-08-22 12:30 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html) @208.185.167.108
Copyright
(C) 1996-2008 All Products Online Corporation. All rights reserved.
Post Message